Just installed my new polycade and it won't turn on. Found out that the wire connect to the power button isn't plugged into anything. Anyone know where this should be plugged in?
No power
- Edited
So, in the center is the main motherboard. On the left side, there is an USB3 cable. Just above that is Round silver diode of some sort. Just north of that is a 10 pin connector. If you get a magnifying glass or use a mag. app on your phone, you will see marking on that 10 pin connection. One says ""+PW-"", and this is where you want to plug it in. Red wire on the top of it, black on the bottom of that part of the 10 pin connector. Granted, you are only use 2 of the 10 pins from the power button wires. Kinda confusing to describe, as I can't figure out how to upload pics of it I took on my phone.
It worked! Thank you @JohnnyD! Now my speakers aren't working either...any idea's? Thanks again!
- Edited
My pleasure. Just make sure the wires for the volume control on the door are in tight. The speakers connect to that. and It looks like they also connect on the same side of the mother board at the top.
2 months later
Hey @kstanley40 - were you able to get your speaker issue resolved? We're happy to help if you need anything!
2 years later
polycade_adam It has been a year. Not sure if you are going to get this but I never got my speakers working. Is there any direction you can give me?